Phase 2 of the Oliver Bowen Maintenance Facility included an extension to the building, track work, traction power, signals, and communication. Design and construction were completed with minimum distruption to the existing storage and maintenance operations.
Associated provided electrical, lighting, and structural engineering services for the project. The lighting system uses a unique backup power system, which also allows departures in visibility conditions down to 366 m (1200 ft) where previously 763 m (2600 ft) was the limit.
The Van Kam terminal includes an 8500 square feet warehouse and 5000 square feet, two-storey office building. Associated's design of the office building leveraged the use of cross-laminated timber (CLT) for a cost-effective, robust structure. Our scope included design of structural, electrical and mechanical systems.
Associated assessed the vulnerability of the existing and proposed Engineering Building at the University of Saskatchewan to climate change, applying the Public Infrastructure Engineering Vulnerability Committee (PIEVC) Risk Assessment Protocol. The project was a unique application of the PIEVC protocol on a future building.
NT Energy's liquefied natural gas plant provides fuel for electrical energy generation in Inuvik. The facility includes two 68,000 litre vertical LNG tanks. LNG vapourization is achieved through a ballasted heat exchanger. Waste heat from the generators is used to heat hot water that feeds the heat exchanger. Associated provided civil, structural, mechanical, and electrical design.
Associated provides power, automation, and communications solutions. We have completed numerous projects for public and private sector clients throughout Canada and overseas. Our team offers a broad range of expertise including outdoor and indoor lighting systems, airfield light and control systems, power supply, arc flash analysis, and complex power and automation systems for water and wastewater treatment facilities. We focus on the design of sustainable, functional, and safe solutions that consider the owner's requirements and full life-cycle costs. Our team brings specialist capabilities in the design of renewable energy systems, such as hydro, solar, and wind, and SCADA and control systems.
For more information, please contact Mark Porter (National Practice Leader, Building Services) at email@example.com.
Canadian Consulting Engineering 2015 Award of Excellence
Calgary International Airport Runway and Airport Trail Tunnel
Net Zero Design - Mitigating Climate ChangeRead more
Crowchild Trail–Flanders Avenue Interchange in Calgary delivered on-time as design-build projectRead more
Proposed rainwater harvesting system at YVR strengthens Vancouver Airport Authority’s sustainable design leadershipRead more
On-site, high-voltage power system supplies power to Fort Hills Oil Sands Project in Northern AlbertaRead more
Calgary Airport Authority
City of Lethbridge
City of Toronto
Government of Bermuda
Kobayashi + Zedda Architects
Northern Health Authority
Prince Rupert Airport Authority
Regional Municipality of Wood Buffalo
Suncor Energy Inc.
Vancouver Airport Authority
Vancouver Coastal Health Authority